Browse all practice questions for the Munitions System Apprentice Block 1 Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Munitions System Apprentice Block 1 Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • AFI 91-202 governs which program?
  • What are the four dependent groups in an operational wing structure?
  • Which elements comprise the Munitions Systems Section?
  • What is a common misfire symptom and appropriate response?
  • How should energetic liquids or propellants be handled?
  • Which flight is responsible for testing, repair, and calibration of precision measurement equipment?
  • What does a Note signify?
  • Which term is used to describe the accountability for operations within the unit?
  • What is a 'lot' or 'lot number' in munitions management?
  • What is the general purpose of an explosive safety order or permit system?
  • Which is the correct order of the five steps of Risk Management?
  • In the Munitions Systems Section, what two items are tracked for the flight?
  • Group commanders report to whom?
  • Where are most daily tasks performed by 2W051 personnel typically carried out?
  • Which document records the movement of munitions between locations?
  • Who should be alerted in an emergency involving munitions?
  • What are the elements of the Munitions Material Section?
  • What hazard exists when working with pressurized fluids?
  • Under which scenario would you require an explosive safety permit?
  • Why is static electricity a hazard around munitions, and how is it mitigated?
  • What documentation is typically used to record munition movements?
  • Which sequence describes proper response to a munition storage fire?
  • Before handling any munition, which steps must you perform?
  • Will indicates which time frame?
  • In policy language, what does Shall mean?
  • During an emergency involving munitions, which groups may respond according to procedures?
  • What are basic steps in training and qualification for handling munitions?
  • Which munition component initiates detonation or ignition?
  • Which equipment is maintained by the Munitions Support Equipment Maintenance (MSEM) Element?
  • What is done to prevent explosives from moving during transportation?
  • At 2W051, what is the expected daily task scope?
  • What process is used when situations exist that are not covered by existing directives?
  • Which flight performs testing, repair, and calibration of precision measurement equipment?
  • What is the required no-smoking distance from designated areas?
  • Which of the following elements should be considered when handling energetic liquids according to SDS?
  • Which term denotes responsibility for operations within the unit?
  • Which of the following are the three goals of Risk Management?
  • How should spills or leaks of energetic materials be managed?
  • Which code represents Information in the work packages?
  • Which code refers to Parts Breakdown?
  • What is the minimum number of personnel in a squadron?
  • What should you do if a munition packaging is damaged during transport or handling?
  • Which elements on munition labels ensure traceability and safe handling?
  • What is the primary objective of the explosives safety program for munitions?
  • Why should munitions not be stored near flammable liquids or oxidizers?
  • What type of vehicle considerations are common for munition transport?
  • Which flight performs diagnostic on and off equipment maintenance on communication navigation, electronic warfare, weapons control, guidance control, airborne photographic, and sensor systems, aircraft instruments and flight controls?
  • In Risk Management, which step follows Identify Hazards?
  • Which AFSC is responsible for storing, maintaining, assembling, and issuing non-nuclear munitions?
  • What constitutes secure access to munition storage areas?
  • How often should storage environmental conditions be reviewed?
  • Which statement is NOT a Risk Management principle?
  • How should munitions be stored to minimize risk?
  • During munition receipt, which action helps ensure proper inventory control?
  • Which element is the single point of contact for developing, coordinating, publishing, and distributing maintenance schedules?
  • What is one of the greatest threats to explosives?
  • Which term is the acronym that appears as a standalone item in the material?
  • How often are fire drills held in munitions storage areas?
  • Where does the majority of munitions maintenance take place?
  • Which term refers to the measurement of flight time within a program?
  • What is the minimum personnel in a wing?
  • If you are handling inert training munitions, which statement is true?
  • Which flight performs inspections and maintenance on AGE?
  • How close may you temporarily park a GOV and AGE other than those being loaded or unloaded near an explosive facility?
  • Which of the following is NOT a major type of Technical Order (TO)?
  • Which element is responsible for receiving, storing, and handling munitions and training items within the storage area, including maintaining storage areas, vehicles, and equipment?
  • What does hazard classification (e.g., Class 1) communicate about a munition?
  • Which element focuses on ensuring the flight can support contingencies by providing trained personnel and deployable resources?
  • Who holds the primary responsibility for identifying workplace hazards including equipment and environmental situations that place workers, equipment, or facilities at risk?
  • Which three main components are typically found in most munitions and their general function?
  • Which flight is described as performing maintenance on conventional munitions, containers, dispensers, and training items?
  • Which statement describes the risk of not using proper PPE when handling energetic materials?
  • Why are separation distances between magazines and other facilities important?
  • What environmental conditions are important for munition storage?
  • Where does TMDE perform testing and calibration?
  • Which term describes the status of a trailer as part of vehicle and MHE management?
  • If a munition is suspected damaged, what is the immediate action?
  • Which responsibilities pertain to the Munitions Operations Element?
  • What is the difference between inert training munitions and live munitions?
  • Which statement correctly describes an Abbreviated TO?
  • Why must incompatible items be segregated in storage?
  • What action should be taken if adverse weather impacts outdoor munition storage?
  • Which phrase refers to the cumulative flight hours for a program?
  • Which flight services transient aircraft, performs repair and reclamation and builds up and services wheels and tires?
  • Munitions Flight is broken down into three sections. Which are they?
  • Which element is primarily responsible for the daily management of the munitions stockpile?
  • Which statement best describes the Munitions Systems Section’s focus?
  • What does a Warning indicate?
  • The Munitions Material Section is primarily involved in which activity?
  • Which flight is responsible for servicing transient aircraft, performing repair and reclamation on large aircraft components, and builds and services aircraft wheels and tires?
  • In the 2W0X1 AFSC, what does the 0 digit indicate?
  • What is the status of 2W011 (Helper) within the 2W progression?
  • Which labeling elements are included for munition labels, and why is labeling important?
  • Which level is the lowest typically assigned to supervisory staff positions at Squadron, Wing, or Command levels in 2W progression?
  • Why is lightning protection and proper drainage important in outdoor munition storage areas?
  • In the Air Force AFSC code 2W0X1, what does the digit 2 represent?
  • Maintenance Supervision is responsible for what?
  • What are the three types of wings?
  • TMDE stands for?
  • Which of the following statements about squadrons is true?
  • What are Work Packages defined as?
  • Which flight is responsible for performing maintenance on and accounting for conventional munitions, containers, dispensers, training items, and associated support equipment?
  • Which TO Identification corresponds to Ground handling, support and air, and missile base operating equipment?
  • Which element performs surveillance inspections to determine if munitions have been affected by age or use?
  • In the AFSC 2W0X1, what does the fourth digit indicate?
  • How should scrap or obsolete munitions be disposed of?
  • What is the level of command above a squadron?
  • To reach the 2W051 Journeyman level, which requirements are needed?
  • What is the primary responsibility of the Precision Guided Munitions Maintenance (PGM) Element?
  • AFI 91-203 corresponds to which standard?
  • Which factor is essential for correctly identifying stored munitions during an inspection?
  • What general rules govern the transportation of munitions?
  • Which of the following statements lists the four RM principles correctly?
  • What are the four types of flights?
  • Which rank corresponds to AFSC 2W000?
  • What is the minimum number of personnel in a group?
  • When receiving munitions, what verification steps should you perform?
  • What action is appropriate if adverse weather impacts outdoor munition storage?
  • Which flight is responsible for maintenance on and accounting for conventional munitions, containers, dispensers, training items, and associated support equipment?
  • Who typically commands the wing?
  • In the AFSC 2W0X1, what does the 'W' designate?
  • Which 2W subdivision loads nuclear and non-nuclear weapons on aircraft?
  • Who provides training when there is a change in equipment procedures or a process?
  • What is 'hot work' and why is it restricted around munitions?
  • Which flight is described as responsible for performing maintenance on transient aircraft and servicing wheels and tires?
  • Name two common fuzing types found in munitions and a basic function for each.
  • Why are separation distances from fuels important in munition storage?
  • What is the purpose of AF Form 55?
  • What is the primary focus of 2W031 in the munitions career field?
  • AFMAN 91-201 pertains to which concept?
  • What is a defining responsibility of a wing commander?
  • Which term represents the overall vehicle and material handling equipment used?
  • Placarding for munition transport is required...
  • What are the prerequisites to achieve 2W071 Craftsman?
  • Which of the following are among the AFOSH requirements for Air Force personnel?
  • Which statement best describes JSTO?
  • What are the three subdivisions within the 2W career field?
  • Why is tagging and isolating a damaged munition important?
  • Which flight conducts non-destructive inspection (NDI) as part of its responsibilities?
  • Which statement about 7-level Craftsman is true?
  • Line Delivery is an element of Munitions Production and serves what role?
  • Which term would you look at to determine the current status of a vehicle or its trailer in the fleet?
  • What is the safest way to move munitions within a work area?
  • Which of the following is NOT one of the four major types of Technical Orders (TOs)?
  • Which form is used to report a hazard and when would it be submitted?
  • Which item is associated with scheduling and recording maintenance tasks for vehicles and equipment?
  • Which acronym is listed as an item in the material alongside vehicle terms?
  • In 2W0X1, what does the '0' digit indicate?
  • Which flight picks up, services, delivers, repairs, and performs approved modifications on powered and non powered AGE, with three sections of repair, inspection, and service?
  • At 2W071, personnel are expected to do what?
  • Which flight performs off equipment maintenance of weapons release systems, guns, munitions racks, adapters, pylons and launchers, and loads nuclear and non nuclear munitions on aircraft?
  • Which element is responsible for maintaining all missiles assigned to a base?
  • Which flight performs off-equipment maintenance of weapons release systems?
  • What is the purpose of access control in munition storage facilities?
  • Which TO Identification corresponds to General?
  • Why is it important to prevent unauthorized access to munition storage areas?
  • Which code covers Storage & Handling?
  • The MSEM Element stands for which of the following?
  • Which TO Identification corresponds to Test Equipment?
  • Which code represents Safety in the work packages?
  • In munition handling, what does the term chain of custody mean?
  • Which measures contribute to secure access to munition storage areas?
  • Who will ensure hazards are eliminated through engineering or administrative controls before PPE is identified as the primary means to protect personnel?
  • Which skill level corresponds to CMSgts who manage entire munitions activities?
  • During post-inspection review, what action should be taken if a munition’s hazard classification is inconsistent with records?
  • What is the first step when a fire is discovered in a munition storage area?
  • Which statement is false about the goals of Risk Management?
  • Why is it important to use approved handling equipment (trolleys, hoists) instead of manual lifting for munitions?
  • Which event marks attainment of the 2W031 Apprentice level?
  • What is the required minimum rank to reach the 2W071 Craftsman level?
  • What is a key safety consideration when transporting munitions in terms of containment?
  • What are the two types of squadrons?
  • The Munitions Systems Section ensures coordination between outside agencies and the munitions flight to meet requirements and also tracks mobility and training status for the flight. Which option best describes this section?
  • The basic wing structure consists of which four elements?
  • Conventional Munitions Maintenance Element is responsible to assemble/disassemble, test and repair munitions to support operational requirements and the assigned stockpile.
  • What does a Caution indicate?
  • What does tagging a munition as recalled communicate to the team?
  • What is the typical rank of a squadron commander?
  • What is the purpose of bonding and grounding in munition handling?
  • What is the role of QA in munitions handling?
  • Which statement best describes the role of AFOSH in Risk Management?
  • In flights with a combat mission, which element is established and focuses on the flight's capability to support contingencies with trained personnel and deployable resources?
  • Which procedure should be followed for reclassifying a munition's hazard level after inspection?
  • Which flight is responsible for aircraft structural maintenance, low observable aircraft structural maintenance, metals technology, and non destructive inspection (NDI)?
  • What PPE considerations are specific when working with fuze components?
  • What action should you take if you are uncertain about a munition's status?
  • Which AFSC subdivision performs maintenance on a nuclear weapon?
  • What digit of the AFSC denotes the skill level?
  • Which element is described as coordinating with outside agencies and tracking mobility for the flight?
  • What is the proper action when you observe a munition not stored in accordance with compatibility or access controls?
  • Which flight handles off-equipment maintenance of weapons release systems?
  • The Line Delivery Element is responsible for what?
  • What is the purpose of the Munitions Inspection Element?
  • What is the acronym for General Armament Guided Tests?
  • In the AFSC 2W0X1, what does the last digit signify?
  • Which flight performs off-equipment inspection, repair, maintenance and testing of aircraft engines, and engine support equipment?
  • Which element coordinates resources for all munitions flight activities on a base?
  • Which of the following is a typical fire protection measure in munition storage areas?
  • What is the primary purpose of lot numbers on munition labels?
  • What is the primary benefit of storing munitions in approved magazines?
  • Which term indicates the condition or readiness of a trailer?
  • Which document is used to authorize and record maintenance tasks for a vehicle or equipment?
  • Which of the following is NOT listed as a requirement of AFOSH?
  • What elements comprise the five rights to observe when handling munitions?
  • Which work package code corresponds to Inspections?
  • Which item refers to a specific metric associated with program operations?
  • What are the three types of Wings?
  • Which term is used to designate the maintenance task authorization?
  • What should you do if a munition is recalled or withdrawn from service?
  • Which personal item should be avoided around fuze components to prevent arcing?
  • Which flight performs maintenance on electrical and environmental (E&E) systems, egress systems, fuel systems, and hydraulic systems?
  • What actions should be taken with questionable or damaged containers?
  • What are the elements of Munitions Production?
  • What happens when excessive heat affects munitions?
  • What is the AFTO 22 form used for?
  • Which element acts as the focal point for planning, coordinating, directing and controlling resources for all munitions flight activities?
  • Which requirements define a 2W091 Superintendent?
  • What is munitions accountability and why is it important?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy